Model EL655.I - Incubator Tumbler
The EL655.I Programmable Incubator Tumbler is designed to optimize cell growth in small volumes by improving suspension, aeration and temperature control. The EL655.I keeps fluid moving in a gentle way while increasing the surface area of the liquid air interface for improved cell aeration. The EL655.I can also be used for more aggressive mixing with temperature control applications by programing the tumbler to rotate clockwise stopping and then rotating counterclockwise and can repeat this cycle as many times as required.
The EL655.I is designed to accommodate 2ml, 15ml and 50ml tubes as well as other containers up to 7 inch long and 3 inch diameter (other sizes are available upon request). The EL655.I does not come with tube/bottle/container clamps; these are sold separately and can easily be changed depending on applications.
A tempered glass window is positioned in front of the unit for viewing inside the incubator. When mixing photosensitive samples an optional cover can be installed to block off all light from entering into the chamber. The interior chamber itself is constructed of polished 316 stainless steel for ease of cleaning.
0 - 100 rpm (programmable with audible alarm)
Forward and Reverse with Jog Function
Max Load Capacity:
Max Container Capacity:
6 Vials from 2 ml to 50 ml each or 4 Jars up to 7" long and 3" in diameter. Custom options available
3°C above ambient to 55°C (programmable with alarm)
± 0.2° C
± 0.5° C
Data Output Via USB:
rpm, timer, temperature (CSV FILE)
115V/230V @ 50/60hz
Length - 31 in | Width - 11.5 in | Height - 13.5 in
Step 1: Choose Power Unit
EL655.I - Incubator Tumbler
115/230V Power Unit Only - Requires Jar Plate or Clip Plate.
Step 2: Choose Adaptor Plate
EL655.A.JP1 - Jar Plate
Each plate holds a single Jar up to 7" long and 3" in diameter. (Max. 4 per machine)
EL655.A.CP1 - Clip Plate
Adaptor plate for EL655.I (Max. 2 plates per machine). Holds 6 Spring Clips in any configuration. Clips sold separately.
Step 3: Spring Clips for Clip Plate
EL655.A.SC2 - 2 ml Spring Clip
Spring clip for holding 2ml Vials
EL655.A.SC15 - 15 ml Spring Clip
Spring clip for holding 15ml Vials
EL655.A.SC50 - 50 ml Spring Clip
Spring clip for holding 50ml Vials
EL655.I Incubator Tumbler
EL655.A.AP1 Adaptor Plate. Hold 6 Spring Clips - Sold Separately
EL655.A.SC2 Spring Clip for holding 2 ml Vials. Attaches to Adaptor Plate - Sold Separately
EL655.A.SC15 Spring Clip for holding 15 ml Vials. Attaches to Adaptor Plate - Sold Separately
EL655.A.SC50 Spring Clip for holding 50 ml Vials. Attaches to Adaptor Plate - Sold Separately
EL655.A.JP1 Jar Plate for holding a jar up to 7" tall and 3" in diameter. Custom sizes available