Eberbach Lab Stirrers and Homogenizer Accessories
Eberbach Manufactures a wide range of overhead stirrer and Mixer accessories and options.
Eberbach designs and builds Stirring, Mixing and Homogenizing Accessories;
- Stainless Steel rods
- Glass Rods
- Misc propellers and Blades which can be fasten to shafts (allows for multiples)
- Universal Support Base
- Stirrer Clamps
- OEM builds
If you need a specific solution, Eberbach Corporation has the ability engineer and manufacture the solution.
Shop Lab Stirrers/Homogenizers Accessories
Stainless Steel Stirring Rod, Blades riveted onto 1/4” shafts, Blade pitch can be adjusted to control agitation, 18” and 24” lengths recommended for Hollow Spindle Stirrers |
|
Eberbach Labtools Stainless Steel Stirring Shaft, 5/16” dia with 8” flatted section for securing #7430 or #7440. Available in 18", 24", and 36" lengths. |
|
Eberbach Labtools 7430 Propeller, Stainless Steel Propeller, 5/16” bore, 2-1/4” OD Complete with wrench. |
|
Eberbach Labtools 7440 4 Blade Turbine, Stainless Steel Turbine, 4-blade, 5/16” bore, 2-1/2” OD Complete with wrench. |
|
Swinging Blade Stirring Rod in Stainless Steel, 24” length, 5/16” diameter, Fits standard round bottom flasks; tilts to pass through flask neck. For use with either 500ml, 1000ml or 2000ml flask |
|
Eberbach Labtools 7470 Glass Stirring Rod, 24” length, 5/16” dia shaft, has 1-3/4” diameter two-blade propeller (5/8” wide), Deep pitch; for Hollow Spindle stirrers. |
|
7560 Universal Support, 3/4” dia x 34” L 2 section nickel-plated steel support is mounted in steel base. Base has 5 threaded holes for convenient rod placement. Available to accomodate up to 15", 24", 32" and 43" diameter cyliders. |
|
Like the 7560 but in stainless steel. |
E7400 - Stirring Rod (6" - 24")
E7420 - Stainless Steel Stirring Shaft (18"- 36")
E7430 - Propeller
E7440 - 4 Blade Turbine
E7460 - Swinging Blade Stirring Rod
E7470 - Glass Stirring Rod
E7560 - Universal Support Stand