 E8000.75 - Waring® 4-liter coupling assembly
Waring® 4-LITER COUPLING ASSEMBLY (500697) |
$63.00
|
 E8400.55 - Square Drive Stud
SQUARE DRIVE STUD, #1/4-28 THREAD, For Waring® 2-Speed Blender |
$14.70
|
E8400.57 - Square Drive Stud
SQUARE DRIVE STUD, #12-24 THREAD, For Waring® 1-Speed Blender |
$14.70
|
 E8400.60 - Washer Drive Stud
WASHER, DRIVE STUD (Pkg. of 12), For Waring® 1-Speed Blender |
$16.80
|
 E8400.65 - Slinger
SLINGER (Pkg. of 6), For Waring® 1-Speed Blender |
$14.70
|
 E8400.70 - Rubber Coupling (Also Known as E8430.70)
RUBBER COUPLING, #1/4-28 THREAD, For Waring® 1-Speed Blender |
$23.10
|
E8400.72 - Rubber Coupling (Also Known as E8430.72)
RUBBER COUPLING, #12-24 THREAD, For Waring® 1-Speed Blender |
$23.10
|
 E8400.75 - Coupling Assembly (Also Known as E8420.75)
COUPLING ASSEMBLY, #1/4-28 THREAD, For Waring® 1-Speed Blender |
$30.45
|
E8400.77 - Coupling Assembly
COUPLING ASSEMBLY, #12-24 THREAD, For Waring® 1-Speed Blender |
$30.45
|
 E8650 - Centrifugal-Flow Blending Assembly
Eberbach Labtools Centrifugal-Flow Blending Assembly, Order No. 8650. •Stator, rotator configuration of this blending assembly forces the flow of liquids through cutting blades, causing efficient cell and tissue homogenization via high speed mechanical disruption. •May be used for emulsification of non-miscible liquids, re-suspension of slurries and, at lower speeds, general mixing with minimal aeration of sample •May be used in all standard, small or semi-micro blending containers. All metal components are made of stainless steel. For use with Waring or Eberbach blending containers |
$157.50
|
 E8660 - (4L) blending assembly
Waring® 4-Liter Blending Assembly, Order No. 8660. Less washer and lock nut; for #8020 Waring 4-Liter container. Suitable for aqueous blending • applications |
$521.85
|
E8661 - Harsh condition assembly
Harsh Condition 4- Liter Blending Assembly, Order No. 8661. Less washer and lock nut. Suitable when using liquids that would otherwise attack the nitrile • seals of the standard 4-liter assemblies |
$659.40
|
 E8670 - Standard Size Blending Assembly
Standard Size Blending Assembly Order No. 8670. • As supplied with blending containers #8440, 8442, 8500, 8510 and 8520.• Assembly has S/S blades• Blade diameter is 2-3/8”. Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. For sealed standard size assembly order#8671. |
$36.75
|
 E8670.05 - Cap Nut
CAP NUT, Pkg. of 6, For Waring® Blade Assembly 8670 |
$15.75
|
 E8670.10 - Bearing Cap
BEARING CAP, For Waring® Blade Assembly 8670 |
$12.60
|
 E8670.15 - Seal Washer
SQUARE DRIVE STUD, #1/4-28 THREAD, For Waring® 2-Speed Blender |
$12.60
|
 E8670.20 - Bearing Holder
SQUARE DRIVE STUD, #12-24 THREAD, For Waring® 1-Speed Blender |
$15.75
|
 E8670.25 - Thrust Washer
THRUST WASHER, Fibre, Pkg. of 12, For Waring® Blade Assembly 8670 |
$12.60
|
 E8670.30 - Socket Head Drive Shaft
SOCKET HEAD DRIVE SHAFT, For Waring® Blade Assembly 8670 |
$17.85
|
 E8670.32 - Nylon Washer
NYLON WASHER, Pkg. of 12, For Waring® Blade Assembly 8670 |
$15.75
|
 E8670.35 - Stainless Steel Washer
WASHER, STAINLESS, Pkg. of 12, For Waring® Blade Assembly 8670 |
$15.75
|
 E8670.40 - Hex Nut
HEX NUT, LEFT HAND THREAD, Notched, Pkg. of 6, For Waring® Blade Assembly 8670 |
$17.85
|
E8672 Stainless Steel Standard Size Blending
All Stainless Steel, Standard Size Blending Assembly, Order No. 8672. Like 8670, but ALL stainless steel blades, bearing holder, shaft, bearing cap and cap nut. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. |
$341.25
|
E8672.06 - Stainless Steel Cap Nut
CAP NUT, Stainless Steel, For Waring® Blade Assembly 8672 |
$40.95
|
E8672.11 - Stainless Steel Bearing Cap
BEARING CAP, Stainless Steel, For Waring® Blade Assembly 8672 |
$57.75
|
E8672.16 - Teflon Seal Washer
TEFLON SEAL WASHER, Pkg. of 12, For Waring® Blade Assembly 8672 |
$40.95
|
E8672.22 - Stainless Steel Bearing Holder
BEARING HOLDER, LEFT HAND THREAD, S/S, For Waring® Blade Assembly 8672 |
$262.50
|
E8680 - Stainless Steel Blade
STANDARD SIZE BLADES, Stainless Steel, Fits Blade Assemblies 8670/8672 |
$14.70
|
 E8710 - Small Size Blending Assembly
Small Size Blending Assembly, Order No. 8710. •As supplied w/ #8470 and #8495 containers• Overall diameter of stainless blades 1-7/8”. Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. Sealed small size blending assembly order # 8711 |
$57.75
|
E8712 - Stainless Steel Small Size Blending Assembly
All Stainless Steel, Small Size Blending Assembly, Order No. 8712. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. |
$367.50
|
E8720 - Stainless Steel Blade
SMALL SIZE BLADES, Fits Blade Assembly For Waring® Blender 8710/8712 |
$17.85
|
 E8730 - Semi micro Blending Assembly
Semi micro Blending Assembly, Order No. 8730. • As supplied with blending containers #8485, 8580, 8581 and 8590• Overall diameter of stainless blades 15/16”. Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers.For sealed semi-micro container order # 8731 |
$73.50
|
E8732 - Stainless Steel Semi micro Blending Assembly
All Stainless Steel, Semi micro Blending Assembly, Order No. 8732. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers.For sealed all stainless semi-micro assembly order # 8733 |
$393.75
|
E8733 - Sealed blending assembly
BLADE ASSEMBLY FOR Waring® BLENDERS, Sealed, Semi-Micro Size, All Stainless Steel, Holds Positive Pressure Of 32 PSI |
$430.50
|
E8740 - Stainless Steel Blade
SEMI-MICRO BLADES, Fit Blade Assemblies for Waring® Blenders 8485/8580/8581/8590 |
$35.70
|
 E8750 - Rubber Gasket
RUBBER GASKETS, Fit Blade Assemblies for Waring® Blenders 8670/8710/8760/8730/8732, Pkg. of 12 |
$17.85
|
E8752 - Teflon Gasket
TEFLON GASKETS, Set of 5, Fits Blade Assemblies for Waring® Blenders 8672/8712 |
$74.55
|
E8760 - Rubber Gasket
RUBBER GASKETS, Pkg. of 12, Fits Blade Assemblies for Waring® Blenders 8730 |
$19.95
|
E8762 - Teflon Gasket
TEFLON GASKETS, Set of 5, Fits Blade Assemblies for Waring® Blenders 8732 |
$54.60
|
 E8770 - Wrench Set
Eberbach Labtools Wrench Set for Waring blending assemblies Order No. 8770 . •For removing and installing blending assemblies• Consists of 5 wrenches:• (A) for cap nut to secure the blades;(B) for large nut which secures assembly in container (2 wrenches supplied - 7/8” and 15/16”);(C) for holding drive shaft when removing cap nuts; (D) spanner wrench for securing bearing holder during assembly. • Gap tool for aligning blending assembly• Not for use with 4-Liter blending assembly |
$186.90
|
E8845 - Waring® Explosion Proof Switch
Model 8845 Waring® Explosion Proof Switch |
$606.04
|
